GT POWER GT8000ESi, Operating Instructions Manual

Page: 29 / 32

As part of an on-going commitment to excellence in
product support, Euroquip offers a comprehensive
product warranty program.
In order to qualify for full warranty support, your
product must be registered. Product not registered
with Euroquip is supported by a base 12 month
warranty only. Spare parts and technical support
will not be available for an unregistered product
outside of this base warranty period. If a Euroquip
dealer has not already registered your product,
please register it online or download a physical
registration form at www.euroquip.co.nz.
Registered warranty period for the GT8000ESi
Commercial Use: 24 Months
Domestic Use:
24 Months
Warranty covers failure caused by manufacturing
and material defects in the product, during the war-
when the product is purchased by the end user.
Warranty is not transferrable and is only claimable
by the original purchaser.
Warranty does not cover parts that are subject to
wear and tear from usage.
Warranty covers failure of a product caused by
defective materials and/or manufacturing for the
The warranty period begins when the product is
purchased by the end user. Warranty is not trans-
ferrable and is only claimable by the original pur-
chaser.
Warranty also does not cover failure caused by
the untimely replacement or service of the above
wearing parts. Evidence must be provided that the
product has been maintained and serviced suitably
for a claim to be considered under warranty.
Failure caused by incorrect operation of the prod-
uct, lack of proper care and maintenance of the
product, external damage, external circumstances
such as contaminated fuel or poor water supply,
service by a party other than an Approved Service
Agent, is not covered under warranty.
Warranty does not cover pre delivery service and
adjustment, or failure that may occur as a result of
lack of/ incorrect pre delivery service and adjust-
ment.
Warranty does not cover any incidental, indirect or
consequential loss, damage or expense that may
result from any defect, failure or malfunction of a
product.
Should any issue be found to be a combination of
a warranty failure and a non-warranty issue, the re-
pair cost component to rectify and repair the non-
warranty failure is the customers’ full responsibility.
as a warranty claim is made at the sole jurisdiction
of Euroquip.
No costs incurred will be considered under war-
ranty if repairs are carried out by a party other than
a Euroquip Approved Service Agent, unless with
prior consent in writing from Euroquip.
It is the responsibility of the purchaser to deliver a
product under warranty to the nearest relevant ser-
vice agent or product reseller. Warranty does not
cover call outs, mileage and freight costs.
If a product is repaired under warranty, parts and
labour required for the repair will be supplied at no
charge. Warranty assessment and repair will be
scheduled and executed according to the normal
the availability of suitable replacement parts.
does not affect the legal rights of any end user, re-
seller or service agent.
Warranty
29. www.gtpower.co.nz
GT8000ESi