GT POWER GT3600ES, Operating Instructions Manual

Page: 7 / 20

7
GT3600ES
Assembling the
Generator
The generator requires some assembly prior
to using it.
Assembling The Accessory Kit
The wheels are designed to greatly improve
the portability of the generator.
NOTE: The wheels are NOT intended
for on-road use.
1. Refer to diagrams to install wheels as
shown.
• Slide the axle through the frame brackets.
• Slide on the hub,wheel and flat washer,
then insert the split pin through the wheel
axle hole.
• Bend the split pin tabs outward to lock the
pin in place.
2. The wheel bumpers as shown.
• Insert an M6 bolt through the rubber
bumper and insert an M8 bolt through the
bottom of the bumper bracket. Secure the
bolt with an M8 flange nut.
• Install an M8 bolt through the generator
frame and through top of the bumper
bracket. Secure the boltwith an M8 flange
nut.
3. Refer to following diagram to install
the handle assembly as shown.
• Insert the handle bracket onto the
generator frame and secure with two M8
bolts and two M8 flange nuts.
• Align the handle assembly holes with the
handle bracket holes and secure with one
M8 bolt and one M8 flange nut.