GT POWER GT3500SE, Operating Instructions Manual

Page: 8 / 28

8. 9. www.gtpower.co.nz
www.gtpower.co.nz
GT3500SE
Control Functions
3 in 1 Switch Knob
1. Engine/Fuel Valve OFF means the
ignition circuit is switched off, the fuel is
switched off and the engine will not run.
2. Engine Switch/Fuel Valve ON .
Ignition circuit is switched on, the fuel is
switched on and the choke is switched
off. The engine can run.
3.
Engine Switch/Fuel valve/Choke ON
Ignition circuit is switched on, the fuel is
switched on and the choke is switched
on. The engine can be started.
TIP:
The choke is not normally required to
start a warm engine.
Engine Smart Control
When the ESC switch is turned to “ON”, the
economy control unit controls the engine
speed according to the connected load. The
results mean better fuel consumption and
less noise. When the ESC switch is turned
to “OFF”, the engine runs at the rated (3100
r/min) Regardless of whether is a load con-
nected or not.
NOTE:
The ESC switch must be
turned to “OFF” when using electric
devices that require a large starting
current, such as a compressor or a
submergible pump.
Digital Display Meter
Normal Operation:
During normal operation, the digital display
meter LCD display has 5 functions which are
viewed by pressing the operating key (3):
Output voltage (V), output current (A), output
power (w), total operating hours and current
operating time.
(1) Multimeter
(2) Liquid crystal display
(3) Operating key
(4) Oil warning light
(5) Overload indicator light
(6) AC pilot light
Failed Operation:
U
a: AC over voltage, indicating the
character of AC (alternative indica
tion of AC and digit).
b: DC over voltage, indicating the
character of DC (alternative
indication of DC and digit).