WORK LIGHT CONSTRUCTION:
A.
Carrying handle with comfort grip
B.
Lightweight, scratch-resistant aluminum frame
C.
Tiltable light face
D.
LEDs
E.
Tempered glass protective lens
F.
Tangle-free grounded power cord
G.
Side star knobs (2)
H.
On/Off switch
I.
USB port
J.
U-frame
K.
Base knob (1)
L.
H-stand base
M.
Textured rubber feet for strong surface grip
ASSEMBLY:
1. Attach U-Frame
(J)
to H-Stand
(L)
by screwing Base Knob
(K)
completely through the holes on
(J)+(L)
until tight.
TO USE:
1. Place H-Stand
(L)
on a sturdy surface. Ensure that all 4
Rubber Feet
(M)
have a secure grip on the surface.
2. Slightly loosen side Star Knobs
(G)
(do not unscrew
completely).
3. Tilt Light Face
(C)
up or down to the desired angle.
4. Tighten Star Knobs
(G)
.
5. Slightly loosen Base Knob
(K)
(do not unscrew completely).
6. Swivel U-Frame
(J)
side to side to the desired angle.
7. Tighten Base Knob
(K)
.
8. Plug Power Cord
(F)
into outlet.
9. To turn light on, switch On/Off
(H)
to On position
(–)
.
10. To turn light off, switch On/Off
(H)
to Off position
(o)
.
11. To charge a device, plug device into USB port
(I)
. USB port
works with LED light on or off, as long as the unit is plugged
into power outlet.
12. Store in a cool dry place when not in use.
TROUBLESHOOTING
Problem
Cause
Solution
LED is not
lighting up.
No power or faulty
connection.
Check that all
connections are secure,
and power is ON.
Questions,
Missing Parts
Customer Service:
1-800-865-6799
CARE AND CLEANING
Your fixture is made from quality materials that will last an
extended period of time with proper care—including periodically
cleaning the surface of the fixture.
1. Use a mild, non-abrasive cleaner. Do not use any solvents or
harsh cleaning agents.
2. Use a soft, non-abrasive cloth.
3. Lightly spray cleaner onto the cloth. Do not spray liquid
cleaners directly onto LEDs, power cord, or any part of this
product.
4. Lightly wipe down fixture with damp cloth. Allow product to dry
completely before restoring power and using LED lights.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient
or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3)
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
A
B
C
D
E
F
G
H
J
I
K
L
M
