GSWeb Playground Equipment IGLOO NET Sphere M Installation Manual Download Page 12

GSWeb Playground Equipment

E-mail) [email protected]

Website) www.gswebplay.com

Tel) +82 (0)55 326 9025

Fax) +82 (0)55 326 9026

65, Saengnim-daero 259beon-gil, Saengnim-Myeon

Gimhae-si, Gyeongsangnam-do, 50802, Republic of Korea

IGLOO NET

MODEL NO.

Rev_0

2018.04.

Sphere M

12

Maintenance

A. General safety measures

On the playground there should be a sign(pictogram) giving the following information:

a) general emergency telephone number;

b) telephone number to contact maintenance personnel;

c) name of the playground;

d) address of playground; and

e) other relevant local information, if applicable.

The entry, exit and emergency paths to and from a playground, intended for use by the public and emergency services, should be accessible 

and free of obstacles at all times.

NOTE  Attention is drawn to local regulations.

B. Procedures

Defects that occur during operation and which put safety at risk should be corrected without delay. If this is not possible, the equipment 

should be secured against use e.g. by immobilization or removal.

There should be written operational procedures covering the measures to be taken in the event of accidents, fire and the like.

Until unsafe equipment is repaired and released for use, access by the public should be prevented. Information about accidents brought to 

the attention of the manager should be recorded on a form that includes the following details:

a) date and tie of accident;

b) age and sex of victim and clothing worn, Including footwear;

c) equipment involved;

d) number of children on site at the time of the accident;

e) description of accident;

f) injury sustained including part(s) of body affected;

g) action taken;

h) witness statements;

i) any subsequent equipment modification;

j) weather conditions; and

k) any other relevant information.

Summary of Contents for IGLOO NET Sphere M














Reviews: