Sprint User Manual
3G Indoor Repeater
16
4.1.2 System Setup
1)
This equipment is basically wall mountable.
2) Installer will have to connect the power supply (after verifying the input power) and RF cable
to the Repeater and then it will be ready to use.
3) For grounding, there is a grounding terminal in main power supply which will be plugged into
power outlet. There is also a separate grounding terminal on the repeater which should be
connected to the on-site grounding terminal to ensure proper grounding.
4) Mounting of repeater should be done by at least two technicians to ensure a safe and proper
installation.
