30302077 Issue 1.06
The base must connect with a diode if P-9907
Active End of Line Unit is connected to the end of
output loop.
The Active End of Line Unit can be used as
the base of a conventional detector. The system
composition is shown in Fig. 4.
COMPATIBLE
CONTROL PANEL
LOOP
INITIATING
OUTPUT-
ACTIVE END OF
LINE UNIT
2
1
3
4
K
2
K
1
O
-
O
+
I
-
I
+
K
2
K
1
O
-
O
+
I
-
I
+
DIODE
DIODE
MANUAL CALL
POINT
MANUAL CALL POINT
Fig. 4
When Active End of Line Unit is not used as
detector base, a cover should be added. The
system composition is shown in Fig. 5.
2
1
3
4
COMPATIBLE
CONTROL PANEL
LOOP
INITIATING
OUTPUT-
K
2
K
1
O
-
O
+
I
-
I
+
K
2
K
1
O
-
O
+
I
-
I
+
DIODE
DIODE
MANUAL CALL
POINT
MANUAL CALL POINT
ACTIVE END OF
LINE UNIT
Fig. 5
Usage of the key
Vertically insert the key to the key-hole, and turn it
anticlockwise by 90
, then push it with force. Turn the
key back and pull it out when the glass is rebounded,
as shown in Fig. 6.
Fig. 6
Specifications
Operating Voltage
24VDC
Standby Current
0mA
Alarm Current
≤
30mA (Equivalent resistor 470
/1W)
Alarm LED
Red, illuminates when alarming.
Normally
Open
Output Contact
Rated value
:
60VDC/0.1A
Contact resistance
≤
100m
Type of Initiating
Part
Reusable
Initiating Mode
Pressing the glass manually
Resuming Mode
Manually resumed by a special key
Wiring
Polarity-insensitive two-wire
Ingress Protection
Rating
IP20
Environmental
Temperature
-
10
℃～+
50
℃
Relative Humidity
≤
95%, non condensing
Material and Color
of Enclosure
ABS, Red (PANTONE 193C)
Dimension
(L
×
W
×
H)
97mm
×
100mm
×
45.5mm
Mounting
Hole
Distance
52mm
～
68mm
Weight
About 144g (with base)
Limited Warranty
GST
warrants that the product will be free from defects
in design, materials and workmanship during the
warranty period. This warranty shall not apply to any
product that is found to have been improperly installed
or used in any way not in accordance with the
instructions supplied with the product. Anybody,
including the agents, distributors or employees, is not
in the position to amend the contents of this warranty.
Please contact your local distributor for products not
covered by this warranty.
This Data Sheet is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532
[email protected] www.gst.com.cn
