Quick Start Guide
Utility Scan
350HS
Copyright © 2016 Geophysical Survey Systems, Inc.
30
All Rights Reserved
Set Depth and Focus Data
This will allow you to enter a known depth or migrate the data to re-establish a
dielectric value. Note that two icons at the bottom have changed when the backup
cursor is displayed on the screen (when the cart was pushed backward.
•
Set Depth
a)
Using the stylus pen, place the horizontal line at a known depth.
b)
Tap Set Depth.
c)
Input the depth and accept. This will change the dielectric value.
•
Focus On
a)
Using the stylus pen, place the cross-hair on a hyperbola.
b)
Tap on Focus On.
c)
Using the stylus pen, match the Focus On hyperbola with a hyperbola on
the screen (width).
d)
Tap on:
•
Set Focus to accept the hyperbola. This will change the dielectric value.
Summary of Contents for UtilityScan 350HS
Page 4: ......
Page 58: ...Model Frequency FCC ID QF7 followed by Model ...