Quick Start Guide
UtilityScan
350HS
Copyright © 2016 Geophysical Survey Systems, Inc.
16
All Rights Reserved
New Project Mode and Last Project Mode
•
New Project Mode
will allow you to configure the system as desired for a new project or continue with
an old project.
•
Last Project Mode
will bypass the Folder selection screen and continue with the last project with all its
settings from the last project. In this mode, you still can make changes to the settings.
•
In either mode, the options are the same.
After selecting New Project, select which folder you would like to save your data, or
create a new folder for a new project. You may do one of the following:
a)
Tap on the arrows and select a folder (project. All
files save will be saved to this folder and the name
of the files will be folder name + a sequential
number. Tap on Accept to the continue.
b)
Tap on New Data Path to create a new
folder (project).
•
Enter and save the new folder (project) name.
•
Highlight the new folder (project) by tapping on the arrows.
•
Tap on Accept to continue.
Summary of Contents for UtilityScan 350HS
Page 4: ......
Page 58: ...Model Frequency FCC ID QF7 followed by Model ...
