GSSI StructureScan Mini XT Manual Download Page 36 | Manualshive

Page: 36 / 69

background image

Geophysical Survey Systems, Inc.

StructureScan™ Mini XT

Manual

MN 70-813 Rev E

24

Section 7: Using the DualScan App

DualScan enables you to view two different profiles on the screen at the same time so that you can judge
differences between them. A common reason to do this is deciding if there is a difference in the apparent
depth of objects. DualScan is only available when the UI Mode is set to Advanced.

DualScan works by selecting a reference file (called Base) and collecting new files to compare to the
Base file. You should familiarize yourself with the ScanMax app before working with DualScan since the
basic setup steps are identical to ScanMax mode.

Setting Up for Data Collection and Choosing a Base File

DualScan uses a reference Base file. If you have no 2D files saved on the system from DualScan or any of
the other 2D modes, the XT will prompt you to collect a new Base file. If you have 2D files stored on the
XT, you will need to specify one of the saved files to act as the Base file.

The image at the right shows the scan
setup screen. Note that at the top-left
corner it indicates: Base: XXX. This
means that no base file is selected and that
you will need to either select one by
clicking Files or collect a new one by
clicking Scan.

Note that collecting a new Base file is only
an option if there are no 2D files stored on
the XT. It may be easier to delete all 2D
files in the current project prior to working
with DualScan (recommended). Please see
Section 8 for details on file deletion.

«
...
34
35
36
37
38
...
»

Summary of Contents for StructureScan Mini XT






































































Reviews:

No comments

Related manuals for StructureScan Mini XT

Brand: Bacharach Pages: 87

Brand: DAKOTA ULTRASONICS Pages: 48

Brand: TE Connectivity Pages: 9

Surface Scatter 7 sc

Brand: Hach Pages: 6

Brand: Hach Pages: 118

Brand: Hach Pages: 388

Orbisphere 51 Series

Brand: Hach Pages: 118

ORBISPHERE 3650 Atex

Brand: Hach Pages: 51

Brand: Hach Pages: 72

POLYMETRON 8362

Brand: Hach Pages: 78

Pocket Colorimeter II

Brand: HACH LANGE Pages: 146

Brand: Hach Pages: 146

Brand: Hach Pages: 36

PHOSPHAX indoor sc

Brand: Hach Pages: 104

Lange ORBISPHERE 3100

Brand: Hach Pages: 384

Brand: Hach Pages: 172

Brand: TA Instruments Pages: 7

Brand: Valhalla Scientific Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands