background image

Geophysical Survey Systems, Inc. 

Model 5103A Antenna 

 

System Settings and User Notes 

FCC Notice (for U.S. Customers): 

This device complies with part 15, class F of the FCC Rules: 

Operation is subject to the following conditions: 

1.

 

This device many not cause harmful interference, and 

2.

 

This device must accept any interference received, Including interference that may cause 
undesired operation 

Warning:

 Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 

Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research 
institutes, commercial mining companies, construction companies and private parties operating on behalf 
of these groups. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the 
operator to serious legal penalties. 

Coordination Requirements 

(a) UWB imaging systems require coordination through the FCC before the equipment may be used. The 
operator shall comply with any constraints on equipment usage resulting from this coordination. 

(b) The users of UWB imaging devices shall supply detailed operational areas to the FCC Office of 
Engineering and Technology who shall coordinate this information with the Federal Government through 
the National Telecommunications and Information Administration. The information provided by the 
UWB operator shall include the name, address and other pertinent contact information of the user, the 
desired geographical area of operation, and the FCC ID number and other nomenclature of the UWB 
device. This material shall be submitted to the following address:  

   Frequency 

Coordination 

Branch, 

OET 

   Federal 

Communications 

Commission 

   445 

12

th

 Street, SW 

   Washington, 

D.C. 

20554 

   ATTN: 

UWB 

Coordination 

 
(d) Users of authorized, coordinated UWB systems may transfer them to other qualified users and to 
different locations upon coordination of change of ownership or location to the FCC and coordination 
with existing authorized operations. 

(e) The NTIA/FCC coordination report shall include any needed constraints that apply to day-to-day 
operations. Such constraints could specify prohibited areas of operations or areas located near authorized 
radio stations for which additional coordination is required before operation of the UWB equipment. If 
additional local coordination is required, a local coordination contact will be provided. 

Notice:

 Use of this device as a wall imaging system is prohibited by FCC regulations. 

MN30-265 Rev - 

Summary of Contents for 5103A













Reviews: