GSS STI 1932 CT Page 7 Assembly Instruction Manual Download | Manualshive

Page: 7 / 49

background image

- 7 -

STI 1932 CT

RF output COFDM

Frequency range: ............................................. 42.0 MHz … 868.0 MHz
Types of modulation: ........................................ QPSK, 16 QAM, 64 QAM
Transmission modes ............................................................................ 2k
Code rates ....................................................... 1/2, 2/3, 3/4, 5/6, 7/8
Guard intervals .................................................... 1/4, 1/8, 1/16, 1/32
Output level: ......................................................................73…89 dBμV
Output impedance: .........................................................................75 Ω

LAN interfaces for HTML control/update

Standard: ............................................................................. 100-BASE-T

Connections

LAN (for data) 1000-BASE-T:  ..............................................2 RJ45 sockets
LAN (for control) 100-BASE-T:  .............................................2 RJ45 sockets
RF output:  .............................................................................. 1 F socket
RF test output (-25 dB):  ............................................................ 1 F socket

General

Mains units: ...... 2 (redundant; can be replaced separately during operation)
Supply voltage ....................................................100…240 V, 50/60 Hz
Power consumption: ..............................................................  max. 75 W
Cooling fans: .....................3 (can be replaced separately during operation)
Ambient temperature:  ............................................................ 0…+50 °C
Dimensions (W x H x D):  ................. 483 mm x 44.5 mm (1HU) x 490 mm
Weight: ....................................................................................... 6.2 kg

2.4 d

esCriPtion

The head-end station converts 32 (2x16) MPTS streams into 32 QAM

or

COFDM modulated transponders. A further 32 MPTS data streams can be
provided as redundant input signals as a software option for an extra charge.

g

ener al

The station is equipped with two LAN inputs, one RF output and one test output
(–25 dB). The MPTS input data streams of lines 1-16 are fed to the left LAN
input that the lines 17-32 at the right LAN input.

«
...
5
6
7
8
9
...
»

Summary of Contents for STI 1932 CT


















































Reviews:

No comments

Related manuals for STI 1932 CT

Brand: Calculated Industries Pages: 52

QuickProfit DH-16820

Brand: Datexx Pages: 1

Hybrid Power DD-612

Brand: Datexx Pages: 1

Brand: Pico Macom Pages: 2

Brand: GSS Pages: 45

Brand: LEXIBOOK Pages: 75

Brand: YANTOK Pages: 11

Brand: Canon Pages: 6

Brand: Victor Pages: 22

Brand: Sencore Pages: 105

Brand: Space Television Pages: 2

Brand: SPACE HD Pages: 16

Brand: Victor Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands