- 32 -
STI 1916 CT
n
et work
Herein you customize the IP Addresses, Gate-
ways and Subnet Masks for the configuration
interface and the streaming interface to the lo-
cal network.
The configuration interface and the streaming
interface must be assigned to different IP ad-
dress ranges
(factory setting 192.168.
0
.120
and 192.168.
20
.120)!
Enter a fixed IP address that is not yet assigned
and is out of the DHCP range of the router.
—> If you do not use separate networks for configuration and stream-
ing, leave the configuration port unused! You can access the user
interface via the IP address of the streaming port. In this case, the
streaming port is also used as a configuration port.
—> Write down the IP addresses! Further access to the device is only
possible via this IP addresses.
—>
If you have forgotten your IP address, you can reset the network
settings and the password by the reset button
(
3
—> For remote access it is important to setup a gateway with Internet
access.
—> The MAC address is only displayed for information an can not be
changed.
—> Before leaving the menu, changes must be transferred to the head-
end station! Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
—> The device requests the required multicast IP streams via the Stream-
ing Interface every 60 seconds.
Querier requests will not be an-
swered!
Keep this in mind when configuring the network (querier
host timeout).
