- 20 -
PSU 8-16 I
C
onneCtinG
sat if
inputs
The following description refers to one of the SAT IF input distributors. The
other SAT IF input distributors are connected in the same manner.
• Connect outputs
E
and
F
of the input distributor (fig. 14) on the front of
the head-end station (fig. 2
) to the corresponding inputs on the cassettes.
u
sinG
t wo
reCeption
levels
(
faCtory
set tinGs
)
• Connect inputs
B
and
D
of the SAT IF input distributor (fig. 14) to the
LNBs.
•
Terminate loop-through output
C
(fig. 14) using the terminating resistor
supplied.
u
sinG
one
reCeption
level
(
loop
-
throuGh
oper ation
)
• Connect input
D
of the SAT IF input distributor (fig. 14) to the LNB.
• Connect loop-through output
C
to input
B
using a RF cable made on-site.
7.3 C
onneCtinG
rf
output
of
the
head
-
end
station
%
$
!
@
#
Fig. 15
• Connect the RF output of the hybrid amplifier
!
to the cable system.