GSS PMDQ 1000, Assembly Instructions Manual

Page: 43 / 54

- 43 - - 43 -
Renaming a PID
In this menu you can allocate a new address to a PID retain-
ing the complete data content.
• Use the
▶ ◀
/
buttons to place the cursor under the re-
spective digit of the hexadecimal number of the PID to be
changed (“
0x0000 ”) and set the hexadecimal number us-
ing .
• Use the
▶ ◀
/
buttons to place the cursor under the re-
spective digit of the hexadecimal number of the new PID
(“
–> 0000 ”).
• Set the hexadecimal number using .
• Use ▶ to set the cursor to “ off ” and switch to “ on ” (re-
name) using the buttons.
Saving settings
• Press the
M
button.
—> The settings are saved.
—> You will be returned to the menu item “Selecting the
cassette” via connection
A
(page 21).
—> If functions of the TPS module are activated, their sta-
tus is shown in the second line of the display:
“
M
” – Station filter is switched on.
“ N ” – NIT is activated.
“
C
” – Network/operator identification CAT is
activated.
—> By pressing the button, you will be returned
to the menu item “Selecting the channel strip” via
connection
B
without
saving the programmed data
(page 28).
—> If necessary set channel strip “
B
”.
A
M
B
Bx 4A
0x0000 –> 0000
REMAP
off
Å Ï
/
on / off
Å Ï
/