Setting the port number
• Press the
▶
button to position the cursor under the port
number e.g. ”
1234
”.
• Use the
▶
◀
/
buttons to position the cursor under the
digit of the port number displayed to be set.
• Using the
buttons set the port number wished.
• Press the
button.
—> The “Setting the IP address of the input transport
stream” – “
IN-IP
” menu is activated.
Setting the IP address of the input transport stream
In this menu you can set the IP address of the transport stream
fed via the LAN interface.
• Use the
▶
◀
/
buttons to position the cursor under the
digit of the IP address displayed to be set.
• Using the
buttons set the IP address wished.
• Press the
button.
—> The “Setting the station filter” – “
PROGRAM
” menu
is activated.
Setting the station filter
The default setting for the station filter is “
off
”. In this menu
you define the services received to be transmitted. If services
are activated the output symbol rate increases.
If the station filter is switched off (factory default) all services
of the transport stream passes the station filter. As soon as the
station filter is activated all services are inactive and can be
added to the transport stream selectively.
Bx 4A
227. 40. 50. 60
IN-IP
Å
Ï
/
