- 19 -
HDTV 1000 S
T 1
,
11836
,
H
,
27500 // ARD transponder
T
Identifier for transponder
1
Selection of the "SAT configuration" (
S
1
,D1,9750,10600
)
,
Commas are the separators between the items
11836
Downlink frequency
H
Polarity - H, L
27500
Symbol rate
// ARD…
Comment; following the "double slash" comments can be en-
tered.
—> With this sequence the LNB settings of one tuner of one cassette are
predefined. The order of the cassettes is defined by the order of the
hardware IP addresses which are assigned to the cassettes manu-
ally (page 25).
Tuner A receiving cassette 1, tuner B receiving cassette 1, tuner A
receiving cassette 2, tuner B receiving cassette 2, etc.
—> A DiSEqC controlled multi switch can be controlled by "SAT configu-
ration" and "Polarity". The control voltage which is present at the
antenna input is not suitable as power supply of the switch.
Use an external power supply.
I 1
,
0x6DCA
,
0
,
AC3
,
EIT
,
10.2
,
"ARD" // ARD
I
Identifier for IP address
1
Output IP address (fourth number) e.g.
227.40.50.
1
,
Commas are the separators between the items
0x6DCA
Service ID (SID); can be entered in hexadecimal or deci-
mal (28106) value. —> You can find the SIDs of the stations
whished e.g. in the internet.
0
Audio PID, 0=all, 1=1st audio,…
AC3
AC3 flag
EIT
EIT flag
10.2
fixed data rate in MB
"ARD"
Individual station name
—>
The order of the first three settings is mandatory
IP-Adresse , Service-ID , Audio-PID ,
from the example: I 1
,
0x6DCA
,
0
,
From the fourth setting on (behind the 3rd comma) the order is flex-
ible!
—> AC3 and EIT are so called "Flags" (software switches), which set
certain PIDs.
