- 25 -
HDTV 1000 S
• Press the button to activate the setting options ("
Options
").
—> The "Setting the hardware IP address of the cassette" – menu
"
IP-ADDR
" is activated.
s
et ting
the
hardware
iP
address
of
the
Casset te
—>
Two IP address ranges are used:
–
"Hardware" IP addresses (menu ETHERNET), which are used to con-
nect the cassettes in the network (e.g. 192.168.0.x).
–
"IPTV" IP addresses (menu IP-OUT), which are used to send and re-
ceive the IPTV channels (e.g. 227.40.50.x). These IP addresses must
be within the "multicast" range from 224.5.0.0 to 231.255.255.255.
To operate the cassette in a network, an IP address must be assigned to
each IPTV cassette. If a manually setting of the Ethernet parameters is se-
lected, set the IP address of the cassette in this menu. If "
DHCP
" is selected,
the "
IP-ADDR
", "
IP-MASK
" and "
IP-GATEWAY
" sub-menus display the param-
eters that were assigned automatically by a connected DHCP server, e.g.
"192.168. 0.128*". The star " * " in the display means that the data is
provided by a DHCP server. If no server is connected, "
0. 0. 0. 0
"
appears in the corresponding menu.
Bx 4
192.168. 0.128
IP-ADDR
• Use the
buttons to place the cursor under the digit of the IP address
displayed to be set and use
to set the IP address wished.
• Press the
button.
—> The "Setting the address range" – "
IP-MASK
" menu is activated.
