- 10 -
HDMT 263, HDMT 265
5.1 p
repar atIon
•
Connect the test receiver to the HF output on the COFDM module
D
or to the
HF output
G
on the output collector if it is already connected (page 7).
• Adjust the test receiver to the output channel of the modulator.
• Switch on the modulator if necessary. For the modulator, there are green
shining LEDs which indicate if the modulator is switched on (see illustra-
tions).
LED –
Channel strip “A“
Level control
-20 dB
LED –
Channel strip “B“
LED –
Channel strip “A“
Level control
-20 dB
LED –
Channel strip “B“
• To operate these modules the software version of the control panel must be
"
V8
" or higher. You can find the current operating software on the website
"www.gss.de".
