- 34 -
PCIM 1000
n
et work
i
nfor m ation
t
able
(nit)
The cassette outputs a generated NIT via LAN, if NIT is switched on.
Bx 4A
off
NIT
=> Make
• To switch NIT on/off ("
on
"/"
off
") press the
buttons.
• Using button (=>"
Make
") you can generate a NIT.
—> IF you generate a NIT using the menu "NIT" of any cassette, all
channels received via the PCIM 1000 will
not
be included. If you
would like to modulate these channels e.g. to a DVB-C transponder
later on, you can manually add this transponder "in advance" to the
NIT via the PSW 1000 software. Therefore observe the operating
instruction of the PSW 1000.
For all cassettes able to output a NIT:
—>
All these cassettes must be set and ready for reception.
—> The NIT of all cassettes are switched on.
—> The cassette fetches all the information (output frequencies, output
symbol rates, etc.) it needs from all cassettes in order to generate
the cable NIT. This process may take a few seconds.
Then the NIT is generated, added and sent to all cassettes. The
other cassettes also add this new cable NIT. The status of all cas-
settes in the NIT menu changes to "
on
".
The display shows: "
read … / copy …
".
• To switch off the new NIT ("
off
") press the button.
—>
The NITs of the other cassettes will stay switched on. When the
NIT of the cassette is switched on again ("
on
") by pressing the
button, the previously generated NIT is added again. If you have
changed parameters in the meantime, you must first select "
Make
"
to generate a new, up-to-date NIT.
• Press the
button.
—> The "Deleting a PID" – "
DROP
" menu is activated.
