- 29 -
PCIM 1000
lan
data
r ate
In this menu you adjust the LAN output data rate.
Bx 4A
LAN RATE
auto
• Press the
buttons to position the cursor under the digit of the data rate
to be set.
• Using the
buttons set the desired data rate (2 MBit… 80 MBit,
"auto").
—> The sum of the data rates of the lines A + B must not exceed 80 MBit
• Press the
button.
—> The menu "Input parameter" –
INPUT
" is activated.
i
nPut
Par a meter
In this menu you have to set the corresponding input parameters for the trans-
ponder to be received.
k
ind
of
modul ation
Bx 4A
/B
COFDM 8MHz
INPUT
• Using the buttons
select the corresponding kind of modulation of the
transponder (COFDM 7MHz, COFDM 8MHz, QAM16…QAM256).
s
ymbol
r ate
If "QAM…" modulation is selected, the setting for the symbol rate appears at
the right side.
Bx 4A
/B
QAM256
INPUT
6900
• Use the
buttons to position the cursor under the digit to be set for the
symbol rate then use
to set the corresponding symbol rate.
• Press the
button.
