- 20 -
HDE 166
t
r ansport
strea m
id
and
orgnet id
If the input signals are encoded to a separate transport stream (e.g. setting of
the output signal path -> ASI without any ASI input signal), a new ORGNET-ID
must be assigned to the transport stream.
IP 1
…4
0x0001,0100
TS/ONID
• Use the
buttons to select the digit of the hexadecimal number to be set and
use the
buttons to set the desired character.
• Press the button.
—> Return to the main menu "IP output signal"
—> If necessary perform the IP output settings for additional SPTS data
streams.
—>
When you exit the menu, note that the desired kind of data stream –
MPTS or SPTS 1… SPTS 4 – is be set!
• Press the button.
—> The "Input parameter" – "
INPUT
" main menu is activated.
i
nput
par a meter
In this menu you select the input, you would like to set the input parameters in
the submenus (AV 1 … AV 4).
Bx 2
AV 1
INPUT
=>
—> If you do not want to do input settings, press the
button. The
"Transport stream ID and ORGNET ID" – "
TS/ONID
" main menu is acti-
vated (page 20).
• Using the
buttons select the corresponding input.
• Press the button.
