background image

 

 

- 4 - 

HAV 160

2.2  m

eanIng

 

of

 

the

 

symbols

 

used

 

 

 

Important note

 

—> 

 

General note

 

 –   /   

 

 –   /   

Optional use of the buttons

 

•    

 

Performing works

2.3  t

echnIcal

 

data

 

The requirements of the following EU directives are met: 

 

2011/65/EU, 2014/30/EU, 2014/35/EU

 

The product fulfils the guidelines and standards for CE labelling (page 8).

 

Unless otherwise noted all values are specified as “typical”.

 

Inputs: 

 

Audio
Impedance: .................................................................................. 47 kΩ  
Audio level: ............................................................................... 0.5 V

rms

 

Video
Impedance: ....................................................................................75 Ω  
Video level:....................................................................................1 V

pp

 

Connections: 

Audio input:  .................................................................... 8 cinch sockets
Video input:  .................................................................... 4 cinch sockets
AV output: ........................................................................... 26-pin socket

Summary of Contents for HAV 160









Reviews: