
- 8 -
HOC 168
6
f
inal
proCedures
After installing the head-end station, retrofitting accessories or installing mod-
ules it is necessary to tighten all cable connections, F terminals and cover screws
in order to maintain compliance with current EMC regulations and to ensure a
reliable operation.
•
Securely tighten the cable connections (F connector) using an open-ended
spanner (spanner width 11 mm).
1
2
2
2
Fig. 6
• Position the breakthroughs in the base plate above the fastening screws
2
(fig. 6).
• Push the base plate in direction of the arrow and lock it with the locking
screw
1
.
• Tighten the fastening screws
2
.
• Tighten the nuts of retrofitted F terminals if applicable.
• Mount the front cover (see STC 160 assembly instructions).