- 20 -
STC 4-16 light
156
In column
Level [dB]
, balance the output levels of the different lines
(0…-10dB). Therefore measure and note down the output level of each
modulator. Adjust the higher output levels to the output level of the modu-
lator with the lowest output level incrementally.
—> Changes must be transmitted to the head-end station!
Therefore click on button
.
161
Balance here the
master output level of the station
to the level of the ca-
ble network (0…-31dB; off).
0dB = unchanged level; -31dB = 31dB attenuation
off = Level 0 (no output signal)
—> Changes must be transmitted to the head-end station!
Therefore click on button
.
180
Before leaving the menu, changes must be transferred to the head-end
station!
• Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
