User manual for Q880 R1.0
14
（
LCD backlight
）：
choose the stand-by state or during the conversation, LCD will
light(5 seconds, 15 seconds, 30seconds and 45 seconds) without pressing.
7-5-2
（
Call settings
）：
（
Call waiting
）：
If a calling party places a call to a called party which is otherwise
engaged, and the called party has the call waiting feature enabled, the called party is able
to suspend the current telephone call and switch to the new incoming call, and can then
negotiate with the new or the current caller an appropriate time to ring back if the
message is important, or to quickly handle a separate incoming call.
There are 3 options in
Call Waiting
menu,
Activate, Deactivate, Query Status
. Please
contact your local operator to apply for this service. Please consult your operator for
details on the operations.
（
Call divert
）：
Call Divert allows you to divert an incoming call to any other number no matter your
phone is switched off or not. You can still receive calls through the specified phone when
Call Divert is activated.
There are 3 options in Call Divert menu, Divert All Voice Calls, Divert If Unreachable,
Divert If No Answer, Divert If Busy, Divert all data calls and Cancel All diverts. Please
contact your local operator to apply for this service. Please consult your operator for
details on the operations.
（
Advanced settings
）：
choose it
，
press [OK] to enter, you can operate as follows:
（
1
）
Area code
：
You can set the area code you want to add when you dial the number.
（
2
）
Local code list
：
you can open or close each number. E.g:if you open the number 5,
when you dial a number with 5 start, the phone will add the area code automatically.
（
3
）
Call time reminder
：
the function will remind the user calling time.
There are 3 options in Call Time Reminder menu,
Off, Single
(1-3000 sec),
Periodic
(30-60 sec).
（
4
）
Answer mode
：
open the function, when a call coming, you can answer the call by
any key except power and DEL key.
（
5
）
Dial delay
：
You can set dial delay time: Off or 1s to 8s. If you select Close, you
should press <Redial> key to call out. If you set the delay time, after you input the
number, the phone will automatically dial the number out till the delay time.
（
Incoming Restriction
）：
choose it
，
press [OK] to enter, you can operate as follows:
（
1
）
Disable: choose this, all the number can call the phone.
（
2
）
Restrict All: choose this, all the number can not call the phone.
（
3
）
Allow List: You can add numbers to the list to block the numbers call you.
