background image

1.8  You must provide proof of your purchase of the Mistral product and the date of purchase in order to

 

obtain 

the benefit of this

 

warranty.

1.9

 

If you live outside the service area of the Company or one of its service agents, this warranty does not 
cover the cost of transport of the Mistral product for service nor the service agent’s traveling costs to and 
from your home.

1.10  If you are required to transport the Mistral product to the Company or its service agent, you must ensure it is 

safely disconnected by a qualified tradesman and securely packed and insured. The Company does not 
accept any responsibility for loss or damage of the Mistral product prior to it being received by the Company or 
its service agent.

1.11  You will be responsible for all costs of returning a Mistral product to the Company and for redelivery of the 

Mistral product by the Company (whether it is the original or a repaired and/or a replacement Mistral product) 
and for any other expenses you incur in claiming under this warranty.

1.12  The Company or its service agent will examine any Mistral product and if the Company determines that it is 

defective through no fault of the Owner and is otherwise undamaged, the Company will repair or replace 
the Mistral product in accordance with this

 

warranty.

DO NOT SEND IN THIS WARRANTY

Fill out the following details and file with your purchase invoice.

RETAIN & FILE WITH YOUR RECEIPT

Your Purchase Receipt/Invoice is proof of date of purchase. If you are unable to establish the date of purchase, or if
the fault is not covered by this warranty, or if the product is found to be in working order, you will be required to bear
all service call charges.

*605HWDLO$XVWUDOLD

 Pty Ltd reserves the right to discontinue items, modify designs and change specifications

without incurring obligation. 
Whilst every effort is made to ensure that descriptions, specifications and other information in this publication is
correct, no warranty is given in respect thereof and the company shall not be liable for any errors therein.
Purchased from:
Co. Name:
Address:
Date of Purchase:
Serial number:
NOTE:

Consistent with our continuing product development policy, improvements may have been made 
which

 

render

 

the

 

contents

 

of

 

this

 

packaging

 

slightly

 

different

 

to

 

that

 

shown.

14

For Warranty and technical queries: Australia 1300 373 199

 : New Zealand 0

800 764 912

Summary of Contents for mistral MR60WSOUT

















Reviews: