Maintenance and cleaning
Caution:
•
Before maintenance or cleaning is carried out,
the range hood should be disconnected from
the main power supply. Ensure that the range
hood is switched off at the wall socket and the
plug removed.
•
External surfaces are susceptible to scratches
and abrasions, so please follow the cleaning
instructions to ensure the best possible result is
achieved without damage.
GENERAL
Cleaning and maintenance should be carried
out with the appliance cold especially when
cleaning Avoid leaving alkaline or acid
substances (lemon juice, vinegar etc.) on the
surfaces
STAINLESS STEEL
The stainl ess steel must be cleaned regularly
(e.g. weekly) to ensure long life expectancy.
Dry with a clean soft cloth. A specialized
stainless steel cleaning fluid may be used.
NOTE: Ensure that wiping is done along with the
grain of the stainless steel to prevent any
unsightly crisscross scratching patterns from
appearing.
Important
Avoid using harsh cleaning chemicals, strong
household detergents or products containing
abrasives as this will affect the appliance
appearance and potentially remove any
printing of artwork on the control panel and
will void manufactures warrantee
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using
warm soapy water. Ensure the cloth is clean and
well wrung before cleaning. Use a dry soft cloth
to remove any excess moisture left after cleaning.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand.Soak them
for about 3 minute in water with a mild detergent and
then brush it gently with a soft brush. Do not apply too
much pressure so as to avoid any damage to it .
(Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and
kitchen utensils.It is advisable not to use rinse aid.
INSTALLING GREASE MESH FILTERS
11
To install filters for the following four steps;
-Angle the filter into the slots at the back of the
hood.
- Put the bustton on the handle of the filter.
- Release the handle once the filter fits into a resting
position.
- Repeat to install all filters.
