9
•
When doing this burn off process, an
appropriately sized saucepan containing
cold water should be placed on the zone in
question.
•
Do not burn off more than one zone at once.
Using the Hob
•
Icons on the control pad as below:
1.
Power Switch
2.
Burner Switch
3.
Burner Display
4.
Minus
5.
Plus
7.
Timer
8.
Timer Display
9.
Children Safety Lock
11.
Double Zone Indicator
12.
Children Safety Lock Indicator
13.
Burner Power Setting Indicator. If it is flash,
can set power. It no flash, can’t set power.
14.
Single power indicator
•
Operation of the touch pad:
1.
Touch Power Switch, all power setting show
“0”, and Burner power setting indicator will
keep flashing. Need to make further operation
in 10S, otherwise it will turn off automatically.
2.
Set power through “Plus” and “Minus”. First
touch plus, power will show “5”. First touch
minus, power will show “9”.
Remark:
a) Can operate one burner in one time.
b) If the burner is working, will show indicator
closed to burner.
c) Set power to “0”, burner will stop working.
•
Children Safety Lock
For safety reason, you can lock the control by
pressing children safety lock. If power was off
before turn off the lock. The lock will keep working
when you restart power. Must turn off the lock for
further operation.
Power setting
Max working hour
1-2
6
3-4
5
5
4
6-9
1.5
•
Stop Working
For safety reason, control panel will stop working if it
worked too long because of customer forget to turn
off the control.
After the control stop working, will show “H”
residential heating for 20 minutes.
•
Auto Heating Mode
1.
Set power to “9”, and then press plus, then
burner display will show “A” and “9” in turn. Now
it is auto heating mode. Then set the power you
need, for example, “6”, display will show “A”
and “6”, for 2.5 minutes (as below chart)
2.
Auto heating mode will start when display show
“A” and “9” the first time. If you set power “6” for
10S, then display will show “A” and “6” for 2
minutes and 20S, and finally show “6” only.
3.
Auto heating time
Power
Auto Heating time(minutes)
1
1
2
3
3
4.8
4
6.5
5
8.5
6
2.5
7
3.5
8
4.5
9
---
4.
Auto heating setting. In this mode, when the
heating is working not exceed for 30S, press
minus, can reduce power. If more than 30S,
press minus, will stop auto heating mode, and
turn to regular heat mode. If more than 30S,
and display keep flashing “A” and power, can
press plus to have more power and still under
auto heating mode.
5.
When you change power, the pasting time will
be calculated into time of auto heating mode of
new power. For example, you choose power “1”,
work for 30S, then change to power “4”, then
auto heating mode time will be 6 minutes only.
