Toxic Fume and Dust Hazard
• Do all work outside or in a well-ventilated area. Dispose of
paint and solvent properly.
• Remove paint before welding or heating:
— Avoid potentially toxic fumes and dust. Hazardous
fumes can be generated when paint is heated by weld-
ing, soldering, or using a torch.
— If you sand or grind paint, avoid breathing the dust.
Wear an approved respirator.
— If you use solvent or paint-stripper, remove stripper with
soap and water before welding.
— Remove solvent or stripper containers and other flam-
mable material from area. Allow fumes to disperse at
least 15 minutes before welding or heating
ST-0043–2
Fall Hazard
• Ladders, stairways and platforms are for use by competent
and trained personnel only. Do not allow children or other
unauthorized persons to have access to the equipment.
• Access to the equipment must be restricted by the use of
security fencing and lockable gates.
• Lower sections of ladders must be fitted with a lockable
safety gate to prevent unauthorized access.
• Make sure that hot surfaces have had adequate time to cool
before working on or in the equipment.
• Lock out and tag out power supplies and fuel supplies to all
equipment.
• Do not attach lifting equipment to ladders or platforms.
• Do not go outside of the safety rails provided on elevated
platforms.
• Do not work at heights during high winds, rain, snow, or ice
storms.
ST-0056–1
PNEG-2309
Horizontal Fertilizer Mixer
9
