GSI Group PNEG - 1711, Owner'S Manual

Page: 2 / 22

PNEG - 1711
Page 2 of 22 06/30/2009
Digital Thermostat Owner’s Manual
READ THESE INSTRUCTIONS BEFORE
INSTALLATION and OPERATION.
SAVE FOR FUTURE REFERENCE.
Thank you for choosing a GSI Vision Series grain dryer. These units are among the finest grain dryers ever
built; designed to give you excellent operating performance and reliable service for many years. This manual
describes the installation and operation for all standard production model dryers. These dryers are available with
liquid propane or natural gas fuel supply, single phase 230 volt, three phase 230 or 460 volt (60Hz) electrical
power.
USE CAUTION IN THE OPERATION
OF THIS EQUIPMENT
The design and manufacture of this dryer is directed toward operator safety. However, the very nature of a grain
dryer having a gas burner, high voltage electrical equipment and high speed rotating parts does present a
hazard to personnel which cannot be completely safeguarded against without interfering with efficient operation
and reasonable access to components. Use extreme caution in working around high speed fans, gas-fired
heaters, augers and auxiliary conveyors which may start without warning when the dryer is operating on
automatic control.
Continued safe dependable operation of automatic equipment depends, to a great degree, upon the owner.
For a safe and dependable drying system, follow the recommendations within the manual and make it a practice
to regularly inspect the operation of the unit for any developing problems or unsafe conditions. Take special note
of the Operating Precautions listed below before attempting to operate the dryer.
Keep the dryer clean. Do not allow fine material to accumulate in the plenum chamber.
A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT.
OPERATING PRECAUTIONS
1. Read and understand the operation manual before attempting to operate the unit.
2. Keep ALL guards, safety decals, and safety devices in place. Never operate dryer while guards are removed.
3. Keep visitors, children and untrained personnel away from dryer at all times.
4. Never attempt to operate the dryer by jumping or otherwise bypassing any safety devices on the unit.
5. Always set the main power supply disconnect switch to OFF and lock it in the OFF position using a padlock
before performing any service or maintenance work on the dryer or the auxiliary conveyor equipment.
6. Before attempting to remove and reinstall the fan blade, make certain to read recommended procedure listed
within the SERVICING section of the manual.
7. Keep the dryer and wet holding equipment CLEAN. Do not allow fine material to accumulate.