14
PNEG-823
Deluxe Downwind Heater
4. Installation
Plenum Thermostat Mounting (Continued)
Figure 4A Plenum Thermostat Mounting on Bin Wall
Transition High-Limit Installation
1. Mark location on transition one (1) foot up from the bottom (entrance collar) and centered in
the transition.
2. Drill or knock out 7/8" diameter hole on marked location.
3. Install transition High-Limit using supplied self-drilling screws.
Figure 4B The transition connecting the heater to the
bin with the plenum thermostat in place.
