GSI Group 890-00584, Installation And Configuration Manual

Page: 91 / 120

14
Tests
Topics Covered in this Chapter
▪ Testing the System
▪ Testing Communication With the Contacts
Testing the System
The system can continuously test the system’s hardware and communication in sequence.
Before You Begin
NOTE: You can click on the item’s button to test a single field.
1. Click on Menu→Test .
2. Click on Start auto test to start testing all tabs sequentially.
A list of the ongoing tests are displayed on the right hand side of the page.
3. Click on Stop auto test to end the testing.
Testing Communication With the Contacts
Testing communication methods with the contacts ensures the messages reach the contacts in the event
of an alert.
Before You Begin
NOTE: The chosen contacts receive a message from the system informing them of the test.
1. Click on Menu→Test .
2. In edit mode, under the General tab, select a contact for the phone test, one for the e-mail test, and
one for the SMS test.
3. Click on Start auto test to start the testing of all tests that are configured.
A list of the ongoing tests are displayed on the right hand side of the page.
4. Click on Stop auto test to end the testing.
895-00677 Agri Alert 128 Touch 91