GSC GS-29, Operation Manual

Page: 8 / 21

II. Intended Use
This grinding machine is suitable for grinding and sharpening HSS / carbide twist drill.
Universal Twist Drills
NC Spotting Drills 120°
NC Spotting Drills 90°
Taper Shank Twist Drills
Deep-Hole Drills
Noss Drills
SG-ES Drills (7570P)
III. Machine Installation Instruction
1. Environmental Condition
● Place the machine on a “flat” and “stable” working table.
● Operate the machine in dry environment and away from liquid.
● Make sure power plug and power cord are installed in proper location.
2. Power Supply
Make sure the local power supply is matching with the voltage specification from the
product label.
Please check the switch is in off position before plugging into socket outlet.
3. Motor Direction Test
①
Plug the power cord into socket outlet.
②
Check the grinding wheel protection cover is fastened by the screw.
③
Quickly switch on and off the machine, then check if the rotating direction of
the right side grinding wheel is
counterclockwise
.
④
Switch on the machine again and check if any abnormal sound.
(The Machine is equipped with carbon brush DC motor. A slightly grinding sound is
considered as normal condition.)
6