GSC GS-29, Operation Manual

Page: 10 / 21

V. Dust Collection Adapter Assembly Steps
1. Thread the hex nut onto the suitable position of the threaded rod, align the end of the
threaded rod containing the hex nut to the tapped hole of grinding wheel cover, and turn
the threaded rod clockwise to thread the rod into the grinding wheel cover and tighten
lightly. (Fig. 5-1)
Grinding Wheel Cover
Hex Nut
Threaded Rod
Fig. 5-1
2. Align the hole in the center of the dust collection adapter to threaded rod. Push the dust
collection adapter to the end. (Fig. 5-2)
3. Assemble the washer and wing nut and tighten the wing nut to secure the dust collection
adapter. (Fig. 5-3)
Dust Collection Adapter
Fig. 5-2
Washer Wing Nut
Fig. 5-3
8