4.5. Disconnecting a battery
•
Disconnect the negative cable from the negative terminal (-) of the
battery.
•
Disconnect the positive cable from the positive terminal (+) of the
battery.
•
General information:
Follow the safety guidelines and measures in Chapter 1.
Never overcharge the LiFePO4 battery, as this will permanently
damage the battery, by using a class 2 LiFePO4-capable charger,
e.g., Staudte-Hirsch chargers.
)
Charge the LiFePO4 battery before use.
Disconnect the charger from the battery, if it is not going to be
used for a long time.
•
Connect the charger as described.
•
Charge the battery in case of an undervoltage shutdown or when
the charge status drops below 20% to maintain the battery life.
We recommend the use of Staudte-Hirsch chargers.
The maximum charging current is 2A or 4.5 A depending on the charger.
The end-of-charge voltage is 14.4 V.
The charging status is indicated by LEDs. If all LEDs light up constantly,
the battery is fully charged.
