IMU-BPP-030-C-2017.08.17 - 4/6
CIAT Sp. z o.o. – ul. Langiewicza 62 – 95-050 Konstantynów Łódzki – POLAND
tel.: (48) 91 432 35 20 – fax: (48) 91 432 35 36 – e-mail: [email protected] – www.gryfit.com
1.5.4 – CX-5C SMOKE CONTROL DAMPER with SDG actuator and EMS
1.6 – ELECTROMAGNETS AND ACTUATORS CHARACTERISTICS
ELECTROMAGNET CHARACTERISTICS
Supply voltage
24 or 48V impulse 230 V AC impulse
Power input
3,5 W
5,5 VA
2 –
USAGE INSTRUCTION
2.1 – REMOTE CLOSING AND OPENING OF CX-5C SMOKE CONTROL DAMPER
2.1.1 – CX-5C WITH ELECTROMAGNET AND FDG-8 ACTUATOR OR WITH OPTIONAL EMS MODULE
To close smoke control damper CX-5C make sure the electromagnet is de-energised and apply voltage to the
actuator. The damper will close in less then 71s. Once it is closed remove the voltage supply from the actuator.
To open smoke control damper CX-5C apply impulse to the electromagnet (recommended from 1s up to 3s), which
will trigger the mechanism and close the damper within not longer than 30s. Once the mechanism was triggered it is
necessary to fully close the damper in order to re-arm the mechanism.
ACTUATOR CHARACTERISTICS
Actuator type
FDG-8-24
FDG-8-230
SDG-15-24
SDG-15-230
Supply voltage
24 V AC or DC
230 V AC
24 V AC/DC
230 V AC/DC
Power input during
tensioning the spring
3,5 W
9,2 VA
7 W
7 W
Power input during
stand-by
0,5 W
6,9 VA
1,5 W
1,5 W
Time of movement –
engine
55 - 71 s
<30s
Time of movement –
spring
20s
N/A
N/A
Protection class
II
III
II
Protection level
IP 54
IP 54
Sound power level
<52 dB(A)
<55 dB(A)
Working temperature
range
-20 ... +50
o
C
-30 ... +50
o
C
Tolerance of voltage is –10% + 10%