E 10210 12 - 2005
Protocols:
MODULAR X6 CCTALK VALIDATOR 62
-
The Exit module does not have its software correctly loaded.
-
The Validator does not have its tables correctly programmed.
b) The Validator does not answer if it is programmed in “L66 compatibility” mode.
5.42
REQUEST LAST MODIFICATION DATE [195]
This command is not available if the Validator is programmed in “L66 compatibility” mode.
This command requests the Validator for information about the date of the last modification of
the programming of the coin tables in the Validator:
Send:
[Dir] [0] [1] [195] [Chk]
Reply:
[1] [2] [Dir] [0] [Data 1] [Data 2] [Chk] -> ACK with 2 data
Where
Dir = address of the corresponding validator
Data 1 = LSB of the date.
Data 2= MSB of the date.
The format of date is the same that the indicated in the command REQUEST CREATION DATE
[196].
Command protected by a PIN.
Notes:
a)
A NACK is returned if
-
The Exit module does not have its software correctly loaded.
-
The Validator does not have its tables correctly programmed.
b) The Validator does not answer if it is programmed in “L66 compatibility” mode.
5.43
REQUEST REJECT COUNTER [194]
This command requests the Validator for information about the coins rejected counter.
Send:
[Dir] [0] [1] [194] [Chk]
Reply:
[1] [3] [Dir] [0] [Data 1] [Data 2] [Data 3] [Chk] -> ACK with 3 data
