background image

 

26

 

 

The alarm mode 

 or 

   must be selected. 

 

Enter the desired switch-on time. 

 

As the alarm signal has a fixed duration of 5 minutes, it is not 

necessary to enter the OFF time. 

 

Press the AUTO button. If the radio is switched off, the 

following indications an visible in the display: 

TIME I or TIME II 

Clock time 

Alarm mode 

 and/or 

   

Switch-on time 

- At the programmed time, the alarm signal will sound for 5 

minutes max. 

- You can enter a switch-off time of your choice with the numeric 

buttons and the TIME I/II button. However, this does not apply for 
the "wake-up by sound 
signal" function. 

 

Use the TUNE A button to select the menu function ON 2. 

 

Press the CLEAR button to quit the menu (the entered data will be 

stored in memory). 

 

For ON 2/OFF 2 applies the same as for ON 1 /OFF 1. 

Checking the Switching Times 1 /2 

 

When you have selected the menu functions ON 1 or ON 2 and 

OFF 1 or OFF 2, you can indicate in the display the switch-on 
time, the station memory location, the alarm (wake-up) mode, 
and the switch-off time by pressing the TUNE A/V button. 

Automatic Switching On and Off 

- The AUTO button allows you to switch on and off the automatic 

functions. 

1. With radio programme 

 

The alarm mode 

 or 

 must be selected. 

 

Enter the desired switching times. 

 

Tune to the desired station or select the desired station memory 

location and adjust the appropriate volume. 

 

Press the AUTO button to enable the automatic function. 

- The radio is switched off if the current time does not lie within 

the programmed automatic time period. 

- The following indications are then visible in the display: TIME I or 

TIME II 

Clock time 

Alarm mode 

 and/or 

 

Switch-on time 

 

If you have selected no alarm mode, a hint with the error 

message 

L TIMER 

will appear when pressing the AUTO button. 

 

It is of course possible to switch the radio on and off with the 
ON/OFF button so that you can listen to the radio also at times 
which are not lying within the automatic switching period. 

 

If 2 switching times are programmed, the display will indicate the 

next switch-on time. 

- At the programmed times, the radio will automatically be switched 

on and off. 

Prematurely switching off the radio: 
•  Press the ON/OFF button. 

- The entered switching times are retained. 
2. With alarm sound signal 
 

 

 

Summary of Contents for YB500






























Reviews: