50
USING EXTERNAL DEVICES
_____________________________________________________
Setting the bit rate
Here you choose the possible digital resolution and the dynamic range possible
of the output signal in order to adapt the signal to the decoder.
1
Select the » Bits« line with »
S
« or »
A
« and activate with »
OK
«.
2
Select the desired value (»16«, »20« or »24«) with »
S
« or »
A
« and
press »
OK
« to confirm.
Setting the sampling rate.
This function is used to limit the sampling rate of the digital multi-channel ampli-
fier.
1
Select the » Abtastrate« line with »
S
« or »
A
« and press »
OK
« to activate
the function.
– This has been set to »48 kHz« at the factory.
2
Select the desired value (»Original«, »96 kHz« or »48 kHz«) with »
S
« or
»
A
« and confirm with »
OK
«.
– Use »Original« for DVDs with a 96 kHz sound signal.
The sound signal is output at the »
AUDIO OUT L R
« sockets and – if
supported by the DVD – at the »
DIGITAL AUDIO OUT
« socket.
– Use »96 kHz« for DVDs with a 96 kHz sound signal for optimum analogue
sound output at the »
AUDIO OUT L R
« sockets. No sound signal at the
»
DIGITAL AUDIO OUT
« socket.
– Use »48 kHz« for DVDs with a 48 kHz sound signal.
The signal is output at the »
AUDIO OUT L R
« socket and at the »
DIGI-
TAL AUDIO OUT
« socket. THE 96 kHz sound signal is converted into
48 kHz.
Bits
select
and choose
24
20
16
Clock rate
select
and choose
96 kHz
48 kHz
Original
