ENGLISH
31
Adapting the digital output to a digital multi-channel
amplifier
With this you choose whether the decoder signal is processed in the unit or fed
unchanged to the digital output. With internal decoding, there is a stereo signal
(PCM) at the digital output.
1
Press »
i
« to call up the main menu.
2
Select the »Sound« menu with »
S
« or »
A
« activate with »
OK
«, or
select directly with »
1 ... 0
«.
3
Select the »Extended settings« line with »
S
« or »
A
« and activate with
»
OK
«.
4
Select the » Digital« line with »
S
« or »
A
« and activate with »
OK
«.
Note:
For further operation, see the following sections, each one starting from
Step
1
.
Selecting audio signal types for the digital output
The audio signal type must be selected according to the connected
decoder/amplifier.
1
Select the »Output format« line with »
S
« or »
A
« and activate with »
OK
«.
2
Select the required output format, (»DOLBY« »MPEG«, or »PCM«) with
»
S
« or »
A
« and confirm with »
OK
«.
3
Select the audio signal type (»Original« or »PCM«) with »
S
« or »
A
« and
then press »
OK
« to confirm.
4
Return to the »Digital« menu by pressing »
x
«.
Setting the bit rate
Here you choose the possible digital resolution and the dynamic range possible
of the output signal in order to adapt the signal to the decoder.
1
Select the » Bits« line with »
S
« or »
A
« and activate with »
OK
«.
2
Select the desired value (»16«, »20« or »24«) with »
S
« or »
A
« and
press »
OK
« to confirm.
USING EXTERNAL DEVICES
_____________________________________________________
Extended settings
select
exit
and choose
back
1 Digital
2 Analog
Bits
select
and choose
24
20
16
Output format
select
exit
and choose
back
1 DOLBY
2 MPEG
3 PCM
Original
Original
Original
Sound
select
exit
and choose
back
1 Surround sound
2 Extended settings
