Grundig WTR 3000 BT, Manual

Page: 12 / 95

ENGLISH 12­ ­
TIMER­MODE
­--------------------------------------------------------------------------------------------------------------------------
Setting­the­alarm­times­and­mode
Note:­
7
You can select the »
Alarm Setup
«
menu also by pressing and holding down
»
Mode/AL
« in stand by mode.
1 Press » ON/OFF « to switch on the device.
2 Open the menu with » MENU «.
3
Select the option »
System Settings
«
with »
r
­
e
« and confirm by pressing »
OK/i
«.
4
Select the option »
Alarm
« with »
r
­
e
« and
confirm by pressing »
OK/i
«.
– Display: »
Alarm1
« and »
Alarm2
« flash.
5 Select the option »
Alarm1
« with left and right
button and confirm by pressing » OK/i «.
– Display: »
Alarm 1 Info
«.
6 Activate the alarm stand-by with »
r
­
e
«
(»
Alarm On
«) and confirm by pressing
» OK/i «.
– Display: »
Alarm On
«.
7 Set Wake Up time with with left and right sym-
bol and confirm by pressing » OK/i «.
8
Set the hours with »
r
­
e
« and confirm by press-
ing » OK/i «.
9
Set the minutes with »
r
­
e
« and confirm by
pressing »
OK/i
«.
10­ Select »
Alarm source
« ( “
”Beep
” = sig-
nal tone) or »
FM
« = FM station) with »
r e
«
and confirm by pressing »
OK/i
«.
Note:
7
If the alarm is set to » FM «, it will be the last
listened station when alarm.
11­­
Select the alarm volume with »
r
­
e
« and con-
firm by pressing » OK/i «.
– Display: »
Volume 9
«.
12­­
Set initial alarm volume with left and right sym-
bol and confirm by press »
OK/i
«.
13­­
Press »
Menu
« to end the setting.
– Display: » e «.
Interrupting­the­alarm
1 Press » OK/i « while the alarm is sounding.
– Display: »
Alarm
« flash.
– The alarm (signal tone or radio) stops.
Note:
7
The alarm will sound again depending
on how often a button has been pressed
(1 time = after 5 minutes, 2 times = 10 min-
utes, 3 times = 15 minutes, 4 times = 20
minutes, 5 times = 25 minutes, 6 times = 30
minutes. The total alarm time is 30 minutes.
Cancelling­alarm­stand-by
1
Press »
ON/OFF
« while the alarm is sounding.
– Display: the current time and alarm.
– The alarm (signal tone or radio) stops, but the
alarm function remains activated for the next
day at the same time.
Activating­and­deactivating­the­
alarm
1
Press »
ON/OFF
« to switch off the device.
2 Press » Mode/AL « to deactivate or reactivate
the alarm stand-by.
Note:­
7
1 time = alarm1 On, 2 times = alarm 1 On
and alarm 2 On, 3 times = alarm 1 Off and
alarm 2 On, 4 times = alarm 1 Off and
alarm 2 Off.