Selecting the TAPE programme source
Insert a cassette into the cassette
compartment.
The display indicates "
TAPE 1
" – or –
if a cassette is already loaded:
Repeatedly press the
“
SO
APF
URCE/
button until
"
TAPE
" appears in the display.
í
Attention with automatic aerials!
Your radio switches on automatically when
loading a cassette.
This causes also the aerial to be extended!
Changing the cassette side
Slightly press the
t
and
s
buttons at
the same time. At the end of the tape, the cas-
sette side is changed automatically.
"
TAPE 1
" - upper cassette side
"
TAPE 2
" - bottom cassette side
Selecting the tape type
Selecting Cr
Press the
¡
MONO/
ij
button until the signal
sounds. The Cr mode is activated and the dis-
play indicates "
Cr
"
.
Deactivating Cr
Press the
¡
MONO/
ij
button until the signal
sounds.
Cassette play with and without
Dolby B NR
Activating Dolby B NR
Briefly press the
¡
MONO/
ij
button:
Dolby B NR is activated and the display indi-
cates "
ij
".
Deactivating Dolby B NR
Briefly press the
¡
MONO/
ij
button:
Dolby B NR is deactivated and "
ij
" disap-
pears from the display.
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. DOLBY and the Double D symbol
ij
are registered trademards of the Dolby
Laboratories Licensing Corporation.
Fast forward and rewind
Fast forward
Press the
s
button untilit locks in place.
The display indicates "
WIND
".
Stopping fast forward
Press the
t
button halfway in.
At the end of the tape, fast forward is auto-
matically stopped and the radio switches to
cassette play.
Fast rewind
Press the
t
button until it locks in place.
The display indicates "
WIND
".
Stopping fast rewind
Press the
s
button halfway in.
At the beginning of the tape, fast rewind is
automatically stopped and the radio switches
to cassette play.
ķ
15
GB
Cassette
