12
TUNING
______________________________________________________________
Tuning the video recorder and the
television
You do not need to do this if the video recorder and the televi-
sion are connected via a EURO-AV (Scart) cable.
1
Switch on the television.
2
Select the »AV« channel position on the television set for
recorder playback via the antenna cable.
3
Tune the television to a free channel in the UHF band bet-
ween channel 21 and channel 69. A free channel is one
which does not carry a signal from a television station (you
can only see and hear static).
– Many televisions display the channel number.
4
Store the free channel position on the television.
5
Press »
Ǽ
« to switch the video recorder to stand-by, then
press and hold down »
i
«.
– The display on the video recorder reads something like
»
C H 2 7
«.
6
Set the channel (in this example, channel 29) by pressing
»
*
P
Ü
« on the video recorder, until the test picture from
the video recorder appears on your television screen.
7
If the quality of the test picture is OK, press »
i
« to save the
setting.
– The video switches to stand-by.
Note:
If the quality of the test picture is unsatisfactory, or if the pic-
ture quality of other channels has deteriorated, then you
should find another free channel on the television and repe-
at the setting from steps
1
to
5
.
You can switch off the station on the video recorder. Fore
more information see the ”Switching the station on the
video recorder on and off” on Page 42.
