ENGLISH
13
Zap function
With this function you may store the current channel position and
switch to another one (zap).
1
Use »
1…0
« or »
P+
«, »
P-
-« to select the channel position you
wish to store in the zap memory (e.g channel position 7, PRO7)
then press »Z« to store it.
– On the picture screen appears, for example, »Z 7 PRO7«.
2
Using »
1…0
« or »
P+
«, »
P-
« you now may switch to another
channel position.
3
By pressing »
Z
« you may switch at any time to the stored chan-
nel position (PRO7 in the example) and switch back (zap) to the
last viewed channel.
4
Press »
i
« to end the zap function.
– The on-screen display disappears.
Alphanumeric channel selection
You may select the channel positions directly by entering the chan-
nel name (e.g. ARD). For this, letters are assigned to the numeric
buttons »
2…0
«. Up to four letters can be assigned.
1
Use »
2…0
« to enter the first letter of the channel name (e.g.
»
2
« for the letter A).
– A list of all TV channels beginning with the letters »A«, »B«,
or »C« appears on the picture screen.
– Every entry of a further letter confines the list of channel
names.
2
Use »
P+
«, »
P-
« to select the desired channel in the list then
press »OK« to call it up.
Note:
Three methods are possible for selecting a channel position:
1. Letter entry off: The channels are only selected by entering
digits.
2. Letter entry on: The channels are only selected by entering
alphanumeric characters.
3. Mix: When entering a digit, the TV set switches automatical-
ly to the corresponding channel position and the channel list
for assigning letters is displayed.
The channel selection mode is selected in the »Installation«
menu under the »Special functions« menu item. See also the
notes in the Easy-Dialog system.
TELEVISION OPERATION
___________________
›
Z 7 PRO7
