11
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Searchingfortelevisionstations
The television has an automatic tuning function,
which first searches for digital TV channels and
then analogue ones.
You start the search and can then sort the televi-
sion stations into your order of preference.
There are 400 presets for digital channels and
99 for analogue channels, to which you can
assign TV stations from the antenna or from the
cable connection (analogue channels).
1
Press »
8
«, »
1…0
« or »
V
« or »
Λ
« to switch
on the television from standby mode.
– The »Installation Guide« menu appears
when the device is first switched on.
2
Press »
–
« or »
+
« to select the language.
Help:
7
If the »Installation Guide« menu does not ap-
pear on the screen, make the setting by fol-
lowing the instructions on returning the tele-
vision to its factory condition on page 19.
Note
7
The antenna power supply may only be
switched on if the antenna is actually an ac-
tive indoor antenna with a signal amplifier
and it is not already supplied with a voltage
via a mains plug (or similar supply).
7
Otherwise you may cause a short circuit and
irreparably damage your antenna.
3
Select the »Active Antenna Power« with »
V
«
or »
Λ
«.
Press »
–
« or »
+
« to switch on the antenna
voltage (»On«).
4
Select »Auto Tuning« with »
V
« or »
Λ
« and
confirm with »
●
«.
– »Country Selection« is active.
5
Press »
–
« or »
+
« to select the country.
6
Select the »Scan Type« with »
V
« or »
Λ
«.
Press »
–
« or »
+
« to select whether you want
to search for only digital television stations
(DTV), only analogue television stations (ATV)
or both (ATV & DTV).
7
Select »Time zone« with »
V
« or »
Λ
«.
Press »
–
« or »
+
« to select time zone.
8
Press »
●
« to start the search for terrestrial TV
channels.
– The »Searching...« menu appears, and the
search for TV stations begins. This may take
several minutes depending on the number of
television stations received.
Note:
7
The search can be ended prematurely with
»
i
«.
Changing stored channels for
digitalstations
You can change the order of the channels found
as required, delete channels you do not need
and block access to certain presets (parental
control).
Press »
F
« (blue) to switch between »Programme
Table – ALL TYPE«, »Programme Table – DTV«,
»Programme Table – RADIO« and »Programme
Table – ATV«.
Press »
z
« (red) to display the channels as-
signed to a network.
Press »
P
« to switch the channel list to the next
page, press »
S
« to switch it back to the previous
page.
Installation Guide
Language Settings
English
Active Antenna Power
Off
Select
Exit
Auto Tuning
s
