44 / EN
Vertical Cordless Vacuum Cleaner / User Manual
6 Problems and remedies
A
WARNING:
Check the following points before asking for repair assistance from the service
department.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Not OK
Battery is discharged.
Charge it.
Battery may be unseated.
Remove the battery and
install it again.
Vacuum connection is blocked.
Separate the appliance
as body (9), brush (7) and
wand. Inspect and clean the
connection points.
Suction power is getting reduced.
Dust reservoir (10) is full.
Clean the dust reservoir
(10) and the filter.
You may have reached the
cleaning period of the filters.
Clean the filters.
Filters may be deformed as a
result of operation and their
replacement period may have
come.
Please contact the
customer services to buy a
new filter.
Motor inlet foam is not cleaned. Clean the filters and
recharge the appliance.
Hair and similar materials may
have tangled on the rotating roll
on the turbo brush (7).
Clean the turbo brush roll.
There is disturbing noise from the
motor.
Vacuum connection is blocked.
Separate the appliance
as body (9), brush (7) and
wand. Inspect and clean the
connection points.
Something may have stuck
between the dust reservoir and
the filter.
Open the dust reservoir and
inspect the filter area.
Cannot charge the vacuum cleaner. The vacuum cleaner is not
installed to the charging dock.
Install the vacuum cleaner
to the charging dock.
Make sure that it is seated
properly. Check the
connection.
