Grundig VCC 7670 A, User Manual

Page: 21 / 88

ENGLISH 21
INFORMATION
__________________________________
Switch off and unplug the appliance before
cleaning it.
Caution
7
Never use gasoline, solvent, abrasive cleaning
agents, metal objects or hard brushes to clean
the appliance.
Dust indicator
If the dust container is full or the hose or the tube
is blocked by a large item such as a sock and
thus the suction is prevented, the dust indicator
next to the on/off button lights red.
Caution
7
If the dust container is empty, this means that a
large item (such as a sock) is stuck in the hose
or the tube and thus the air flow is blocked. In
such cases, switch off the appliance and check
the components.
Emptying the dust container
1 Press the dust container removal button
B
to
remove the dust container
E
and remove the
dust container.
2
Push the dust container removal latches lo-
cated at the back of the dust container
E
from
both sides.
– Open the dust container
E
cover and
empty the container.
3 When you have emptied dust, close the dust
container cover
E
; a click sound will be heard.
4 Insert the dust container
E
back into its loca-
tion.
Cleaning the cyclone separator
1
Press the dust container removal button
B
and
remove the dust container.
2 Press the opening button for the motor protec-
tion filter (MIF) housing
H
and open the cover.
3 Remove the motor protection filter (MIF) lo-
cated inside.
4 After removing the motor protection filter, you
will see the metal handle on the cyclone sepa-
rator. Holding this handle, remove the cyclone
separator from the dust container
E
.
5
Clean the cyclone separator and the dust con-
tainer
E
compartment with a soft brush and
wipe them with a damp cloth.
Caution
7
Cyclone separator should not be immersed in
water.