Grundig VCC 7670 A, User Manual

Page: 19 / 88

ENGLISH 19
Attaching/removing the hose
1
To attach the hose
R
push the hose cap
G
in the direction of arrow until it is aligned with
the housing.
■
The tabs on the hose cap
G
must be seated
correctly.
2
To remove the hose R , press on the tabs on the
hose cap
G
and pull it.
Attaching/removing the
telescopic tube
1
Attach the telescopic tube
N
to the handle
P
.
2 Pull the telescopic tube
N
from the handle
P
to remove it.
3 You can extend or shorten the telescopic tube
N
by sliding the telescopic tube adjustment
latch back and forth.
Attaching/removing the
parquet/carpet brush
1
Attach the telescopic tube
N
to the parquet/
carpet brush
I
.
2 Pull the telescopic tube
N
from the parquet/
carpet brush
I
to remove it.
Adjusting the parquet/carpet
brush
Perform the following actions on the adjustment
latch located on the parquet/carpet brush
I
;
■
Use " " position for hard floors and
parquet.
■
Use " " position for rugs and carpets.
Operation
1 Plug in the appliance after pulling the power
plug located at the back of the appliance.
Caution
7
Stop pulling the appliance cable when it comes
to the yellow mark located on it. After the yel-
low mark the red mark comes. Do not pull any
more after reaching the red mark.
2
Press the on/off button
A
to switch on your
appliance.
OPERATION
______________________________________