22 ENGLISH
6
Then, remove the filter cover from the plastic
dust filter. The cover is under cyclone separator.
In order to remove turn it anti-clockwise and
push it down.
7
If necessary, cyclone saparator can be
removed by pushing down. All parts included
in plastic dust filter except cloth dust bin filter
are washable.
8
Place the cyclone saparator, filter cover and
cloth dust filter back on the plastic dust filter
after cleaning.
9
Place the dust container lid with the plastic
dust filter back into the dust container.
10
Make sure that the cyclone separator is po-
sitioned properly so that the notches on the
sides of it are lined up with the locking pins on
the dust container
G
.
11
Place the dust container
G
back into the unit.
Caution
█
Dry the separator completely before replacing.
█
The cyclone separator should not be sub-
merged in water.
█
Never use detergents or boiling water to wash
the filters.
█
The dust container, including plastic dust filter
must be inserted before the appliance is started
as otherwise the motor will be damaged.
CLEANING AND CARE ______________________
Cleaning the HEPA filter
1
Turn the HEPA filter cover anticlockwise until the
arrow shows the unlocked symbol on the filter
cover and pull the cover out.
2
Take out the HEPA filter. The filter can be tapped
against the side of a dust bin for removal of the
excess dust.
3
Wash the HEPA filter in warm water (maximum
40ºC), rinse very well and leave to air dry.
Caution:
█
Never put the filter into the washing machine or
dry it with a hair dryer.
█
Ensure the filter is completely dry before putting
it back into the cleaner. Allow to air dry for 24
hours before replacing.
█
Do not use detergents or boiling water to wash
the filter.
█
The HEPA filter must be inserted before the ap-
pliance is started as otherwise the motor will
be damaged.
4
When the HEPA filter is completely dry, insert
it back into the appliance before restarting.
